1. Turn of refrigerator. Wait 10-15 minutes and turn back on.
2. Use a cup of water to test operation.
3. Perform Hard reset. Remove the unit (RV) from shore power (120 VAC).
4. Disconnect the battery's negative terminal (12 VDC).
5. Disconnect the solar system in the unit (RV) (12 VDC).
6. Wait 5-10 minutes.
7. Restore Power.
NOTE: Using a battery disconnect in place of disconnecting the battery's negative terminal is not sufficient for disconnecting the battery, because the refrigerator may be directly connected to the battery.
8. Test for operation.
9. Remove refrigerator from opening.
10. Inspect wiring connections, repair as needed.
11. Remove rear panel and inspect for refrigerant leak. If leak is found replace refrigerator.
12. Inspect fuse condition and replace as needed.
13. Perform bench test by connecting directly to a fully charged and maintained battery. If it still doesn't cool, replace refrigerator.

Click here to watch the video "> Why is my refrigerator not cooling? | Lippert Customer Care Center
1. Turn of refrigerator. Wait 10-15 minutes and turn back on.
2. Use a cup of water to test operation.
3. Perform Hard reset. Remove the unit (RV) from shore power (120 VAC).
4. Disconnect the battery's negative terminal (12 VDC).
5. Disconnect the solar system in the unit (RV) (12 VDC).
6. Wait 5-10 minutes.
7. Restore Power.
NOTE: Using a battery disconnect in place of disconnecting the battery's negative terminal is not sufficient for disconnecting the battery, because the refrigerator may be directly connected to the battery.
8. Test for operation.
9. Remove refrigerator from opening.
10. Inspect wiring connections, repair as needed.
11. Remove rear panel and inspect for refrigerant leak. If leak is found replace refrigerator.
12. Inspect fuse condition and replace as needed.
13. Perform bench test by connecting directly to a fully charged and maintained battery. If it still doesn't cool, replace refrigerator.

Click here to watch the video ">
1. Turn of refrigerator. Wait 10-15 minutes and turn back on.
2. Use a cup of water to test operation.
3. Perform Hard reset. Remove the unit (RV) from shore power (120 VAC).
4. Disconnect the battery's negative terminal (12 VDC).
5. Disconnect the solar system in the unit (RV) (12 VDC).
6. Wait 5-10 minutes.
7. Restore Power.
NOTE: Using a battery disconnect in place of disconnecting the battery's negative terminal is not sufficient for disconnecting the battery, because the refrigerator may be directly connected to the battery.
8. Test for operation.
9. Remove refrigerator from opening.
10. Inspect wiring connections, repair as needed.
11. Remove rear panel and inspect for refrigerant leak. If leak is found replace refrigerator.
12. Inspect fuse condition and replace as needed.
13. Perform bench test by connecting directly to a fully charged and maintained battery. If it still doesn't cool, replace refrigerator.

Click here to watch the video " />

Why is my refrigerator not cooling?

Why is my refrigerator not cooling?

1. Turn of refrigerator. Wait 10-15 minutes and turn back on.
2. Use a cup of water to test operation.
3. Perform Hard reset. Remove the unit (RV) from shore power (120 VAC).
4. Disconnect the battery's negative terminal (12 VDC).
5. Disconnect the solar system in the unit (RV) (12 VDC).
6. Wait 5-10 minutes.
7. Restore Power.
NOTE: Using a battery disconnect in place of disconnecting the battery's negative terminal is not sufficient for disconnecting the battery, because the refrigerator may be directly connected to the battery.
8. Test for operation.
9. Remove refrigerator from opening.
10. Inspect wiring connections, repair as needed.
11. Remove rear panel and inspect for refrigerant leak. If leak is found replace refrigerator.
12. Inspect fuse condition and replace as needed.
13. Perform bench test by connecting directly to a fully charged and maintained battery. If it still doesn't cool, replace refrigerator.

Click here to watch the video